Product Description
Plastic Extrusion Machine Extruder Double Screw
(Notes: Different raw materials, the output is different, please tell me what’s the material you want to produce, I will recommend you the correct model.)
| Type | TSH-20 | TSH-35 | TSH40 | TSH52 | TSH65 | TSH75 | TSH95 |
| Screw Diameter (mm) | 22 | 35.6 | 41 | 51.4 | 62.4 | 71 | 93 |
| Screw Speed (rpm) | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Motor Power (kW) | 4 | 18.5 | 30 | 55 | 90 | 132 | 315 |
| L/D | 32-60 | 32-68 | 32-68 | 32-68 | 32-68 | 32-68 | 32-68 |
| Output (Kg/h) | 2-15 | 15-95 | 70-120 | 155-255 | 255-400 | 450-750 | 950-1600 |
Product details:
1. Twin screw main extruder: Main motor: Imported “WEG”or “SIEMENS” Variable frequency motor(The frequency converter will automatically change the frequency to reduce the frequency of the motor. The operating current will always run between 80%, 50%, and 30% of the rated power. This will greatly reduce the motor’s operating current and achieve the effect of saving electricity).
2. Gearbox: Warranty: 3 years; (2)Concentricity deviation of output shaft and input shaft: within 0.2mm; (3)Both output shaft radial bearings are imported “IKO”and “NSK” bearings;
3. Electric cabinet box: (1)Inverter: Imported Switzerland”ABB”, Japan”TOSHIBA”,”FUJI”; (2)PLC: Imported “SIEMENS” brand; (3)Main electrical controller:”Schneider” brand; (4)Display of electric current:Japan “OMRON” brand; (5)Temperature instruments: Japan “OMRON” brand;
4. Twin-screw Barrel
Bimetal wear-resistant and corrosion-resistant material, the base material is 45# steel, after multiple forging, quenching and tempering treatment; the cylinder is inlaid with α-101 wear-resistant and corrosion-resistant alloy bushing, which has better wear resistance and corrosion resistance than general alloy bushings.
5. Screw elements
(1)Material is W6Mo5Cr4V2 (high speed tool steel) with the best wear resistance, the whole adopts vacuum quenching treatment, hardness is 60 ~ 62HRC; (2)Designed by the building block principle, and the screw element and the screw shaft are connected by an involute spline, and the screw combination can be adjusted according to the process requirements; The screw elements are all made by CNC machining center, with good identity and strong process repeat-ability,which is benefit for changing;
6. Screen changer+Die-head: Quick open die-head, convenient and fast, short flow path of the machine head and less material storage can significantly reduce the deterioration of the material’s physical properties, yellowing, black spots and other defects;
Machine applications:
(Notes: Our machine can be applied in the production of different plastics, such as color masterbatch, filler masterbatch, engineering plastics, reinforced materials, recycling plastics, biodegradable materials and so on.)
Our certificates:
Our company was awarded as ZheJiang High-tech Enterprise and National High-tech Enterprise.
Won the title of”2571 HangZhou Gazelle Enterprise”. This award represents the recognition by the Municipal Development and Reform Commission of HangZhou Tengda’s prosperous and healthy development over the years and its achievements.
Our company has passed ISO:9001 international quality management system certification,EU CE certification, TUV Rheinland certification, and has more than 30 patents.
Our customers:
Related products:
product-list-1.html
FAQ:
Q: Are you trading company or manufacturer?
A: We are factory.We have the technical production team,and the workers are all very experienced.
Q: Why choose you?
A:You can get a very fair price from us and our price can make you beat your competitors in the marke
Q: What kind of certification do you have?
A: Our products have obtained ISO9001 and CE certification,the quality can be guaranteed.We focus on
the field of extrusion machine,and aim to be the best manufacturer of this field.
Q:What’s the payment?
A:L/C, T/T, Western Union, Paypal, Money Gram, Cash.
| After-sales Service: | Provided |
|---|---|
| Warranty: | Gearbox: 3 Years; Extruder: 1 Year |
| Type: | Plastic Granules Machine |
| Plastic Processed: | Any Plastic Material |
| Product Type: | Granulating Extruder |
| Feeding Mode: | Multiple Feed |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Screw Sizes and Their Uses
Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.
The major diameter of a screw shaft
The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
The pitch diameter of a screw shaft
When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.
The thread depth of a screw shaft
Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
The lead of a screw shaft
Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.
The thread angle of a screw shaft
The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
The tapped hole (or nut) into which the screw fits
A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.
editor by CX 2023-11-22
China HENGDE PC180 3HP CE certification good price waste recycling with blower mill price plastic shredder screw blade shaft
Condition: New
Plastic Type: PVC, PET, ABS, PP/PE, PE, PP, PC, PMMA, PA, PS
Machine Type: Plastic Crusher
Max.Production Capacity (kg/h): 150
Production Capacity (kg/h): 100 – 150 kg/h
Use: Bottle Crusher;Film Crusher;Plastic Pipe Crusher;Waste Plastic Crusher
Voltage: Customized
Dimension(L*W*H): 720*460*940
Power (kW): 2.2
Weight (T): 0.16
Warranty: 1 Year
Applicable Industries: Building Material Shops, Manufacturing Plant, Construction works , Industrial
Key Selling Points: Competitive Price
Showroom Location: United Kingdom, United States, France, Germany, Viet Nam, Philippines, Brazil, Indonesia, Pakistan, 42bl 57bl series 3 phase 12v 24v 36v high speed 4000rpm brushless dc servo motor 30w 50w upto 200w bldc motor India
Machinery Test Report: Provided
Video outgoing-inspection: Provided
Warranty of core components: 1 Year
Core Components: Bearing, Motor
Crushing Chamber: 180*150 MM
Rotation Diameter: 150 mm
OEM & OEM: Yes
Weight: 160 KG
Power(KW): 7.5 KW
Capacity: 100-150 KG/H
Power: 2.2/3 HP
Standard power supply: 3phase 380v 50hz
Shape: flake blade
Marketing Type: Hot Product 2571
Packaging Details: standard export package: film + plywood case
Port: HangZhou; ZheJiang
Products Description Plastic crusher/shredderPlastic crusher, also known as plastic crusher, is mainly used for crushing various plastic plastics and rubbers such as plastic profiles, pipes, rods, threads, films, and waste rubber products.Plastic shredders are widely used in waste plastic recycling and factory scrap recycling. The motor power of the plastic crusher is between 3.5 and 150 kilowatts, and the speed of the cutter roller is generally between 150 and 500 rpm. In terms of structure, there are tangential feeding and top feeding; the knife roll is different from CZPT knife roll and hollow knife roll. Product Specifications
| Model | Crushing chamber mouth（MM) | Rotation diameter（MM） | Crushing capacity(KG/H) | Moving knife（PCS) | Moving knife（PCS) | Power（KW/HP) | Mechanical Dimensions(MM) | Weight(KG) |
| HPC180 | 180*150 | φ150 | 100-150 | 9 | 2 | 2.2/3 | 720*460*940 | 160 |
| HPC250 | 250*220 | φ216 | 130-200 | 6 | 2 | 4/5.5 | 920*680*1060 | 295 |
| HPC300 | 320*240 | φ220 | 220-300 | 9 | 2 | 5.5/7.5 | 1571*760*1160 | 330 |
| HPC400 | 420*270 | φ250 | 350-500 | 12 | 2 | 7.5/10 | 1140*900*1310 | 430 |
| HPC500 | 520*300 | φ260 | 450-600 | 15 | 2 | 44880 | 1260*1060*1450 | 590 |
| HPC600 | 620*340 | φ300 | 600-800 | 18 | 4 | 15/20 | 1500*1160*1685 | 790 |
| HPC700 | 720*340 | φ300 | 800-900 | 21 | 4 | 15/20 | 1600*1260*1685 | 830 |
| HPC800 | 800*500 | φ400 | 800-1000 | 24 | 4 | 22/30 | 2150*1480*2210 | 1780 |
| HPC900 | 900*550 | φ400 | 1000-1200 | 27 | 4 | 22/30 | 2150*1580*2210 | 1890 |
| HPC1000 | 1571*610 | φ500 | 1200-1500 | 30 | 4 | 37/50 | 2350*1760*2580 | 1950 |
Lead Screws and Clamp Style Collars
If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:
Acme thread
The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
Lead screw coatings
The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
Clamp style collars
The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these two styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
Ball screw nut
The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during one rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with one or two independent closed paths. Multi-circuit ball nuts have two or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.
editor by czh 2023-07-03
China Plastic Machinery Parts Screw Shafts screw blade shaft
Product Description
WR15E Abrasion Resistance Twin Screw Shaft Diameter 10 – 120mm HRC44 Hardness
Production description:
| Product name | Twin screw shaft | Brand name | JOINER |
| Model number | 125 | Material | WR15E WR30 40CrNiMo |
| Spline type | involute inner spline | Place of original | ZheJiang , China |
| Size | Dia 10-120mm/ L 500-900mm | Screw combination | Brick patern construction |
| Construction | With or without cooling system | LD | 36:1 40:1 44:1 48:1 |
| Hardness | HRC44 | ||
| Surface treatment | vacuum quenching | ||
| Certification | ISO9001 2015 | ||
| Application | Plastic industry Wood plastic inflated Food powder coating | ||
| For what machine | Plastic Wood Food Twin Extruder machine | ||
| shaft for | APV KOBE OMC Buhler KraussMaffei Theysohn Buss Berstorff Toshiba Clextral Labtech USEON Lantai others JSW Leistritz Keya Maris |
||
| Our strengths | Competitive costs per unit of production Fast turn round for collection and delivery on refurbished parts Parts available from stock for a wide range of extruder makes Comprehensive inspection procedure on all parts prior to dispatch A time proven quality service Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts Customized solutions to meet specific needs. |
||
| Buying Xihu (West Lake) Dis.s | Attn:Tracy Han Tel: 1825717954 |
||
We manufacture screw shafts for co-rotating twin screw extruders ranging from 10 mm to 120 mm /Length 500-900mm and over. With cooling system /without cooling system. Our manufacturing specializes in shafts for twin screw extruders and is optimized for flexible order handling.
Types of shaft:
Single keyway Square keyslot High torque key button Dual keyslot
Involute inner spline Round keyslot Retackle spline Client requirements available
Material
WR15E WR30 40CrNiMo
About our Company
Joiner Machinery Co.,Ltd has several years experience in the manufacture and supply of new and refurbished wear parts for all major makes of twin-screw extruders and the Industries involved in plastics industry, chemical industry, powder coating, food food industry, wood plastic etc..
Through close working relationships with our customers we have been CZPT to fulfill their requirements. Flexibility enables us to design and manufacture standard and bespoke components for unique applications.
Through our highly trained and experienced staff we are CZPT to offer technical support and advice.
Our strengths are based on many years experience supplying the following:
* Competitive costs per unit of production
* Fast turn round for collection and delivery on refurbished parts
* Parts available from stock for a wide range of extruder makes
* Comprehensive inspection procedure on all parts prior to dispatch
* A time proven quality service
* Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts
* Customized solutions to meet specific needs.
Why choose us?
Packaging Delivery
Packaging Details: Wooden case, Sea-worthy or export standard.
Port: HangZhou
Lead time: 40-50 days after order confirmation.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in HangZhou, ZheJiang Province, China, 1) You can fly to
HangZhou Airport directly. We will pick you up when you arrive in the airport; All our clients,
from domestic or abroad, are warmly welcome to visit us
Q: What makes you different with others?
A: 1) Our Excellent Service For a quick, no hassle quote just send email to us We
promise to reply with a price within 24 hours – sometimes even within the hour. If you
need an advice, just call our export office, we will answer your
questions immediately. 2) Our quick manufacturing time For Normal orders, we will
promise to produce within 30 working days. As a manufacturer, we can ensure the delivery time according to the formal contract.
Q: What is your terms of payment ?
A: 1) T/T payment; 2) LC;
|
US $500-1,000 / Piece | |
10 Pieces (Min. Order) |
###
| Transport Package: | Wood |
|---|---|
| Trademark: | JOINER |
| Origin: | Sichuan |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product name | Twin screw shaft | Brand name | JOINER |
| Model number | 125 | Material | WR15E WR30 40CrNiMo |
| Spline type | involute inner spline | Place of original | Sichuan, China |
| Size | Dia 10-120mm/ L 500-900mm | Screw combination | Brick patern construction |
| Construction | With or without cooling system | LD | 36:1 40:1 44:1 48:1 |
| Hardness | HRC44 | ||
| Surface treatment | vacuum quenching | ||
| Certification | ISO9001 2015 | ||
| Application | Plastic industry Wood plastic inflated Food powder coating | ||
| For what machine | Plastic Wood Food Twin Extruder machine | ||
| shaft for | APV KOBE OMC Buhler KraussMaffei Theysohn Buss Berstorff Toshiba Clextral Labtech USEON Lantai others JSW Leistritz Keya Maris |
||
| Our strengths | Competitive costs per unit of production Fast turn round for collection and delivery on refurbished parts Parts available from stock for a wide range of extruder makes Comprehensive inspection procedure on all parts prior to dispatch A time proven quality service Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts Customized solutions to meet specific needs. |
||
| Buying Guides | Attn:Tracy Han Tel:008618208137954 |
||
|
US $500-1,000 / Piece | |
10 Pieces (Min. Order) |
###
| Transport Package: | Wood |
|---|---|
| Trademark: | JOINER |
| Origin: | Sichuan |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product name | Twin screw shaft | Brand name | JOINER |
| Model number | 125 | Material | WR15E WR30 40CrNiMo |
| Spline type | involute inner spline | Place of original | Sichuan, China |
| Size | Dia 10-120mm/ L 500-900mm | Screw combination | Brick patern construction |
| Construction | With or without cooling system | LD | 36:1 40:1 44:1 48:1 |
| Hardness | HRC44 | ||
| Surface treatment | vacuum quenching | ||
| Certification | ISO9001 2015 | ||
| Application | Plastic industry Wood plastic inflated Food powder coating | ||
| For what machine | Plastic Wood Food Twin Extruder machine | ||
| shaft for | APV KOBE OMC Buhler KraussMaffei Theysohn Buss Berstorff Toshiba Clextral Labtech USEON Lantai others JSW Leistritz Keya Maris |
||
| Our strengths | Competitive costs per unit of production Fast turn round for collection and delivery on refurbished parts Parts available from stock for a wide range of extruder makes Comprehensive inspection procedure on all parts prior to dispatch A time proven quality service Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts Customized solutions to meet specific needs. |
||
| Buying Guides | Attn:Tracy Han Tel:008618208137954 |
||
Screw Shaft Types and Uses
Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.
Major diameter of a screw shaft
A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its two outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between one thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in one turn. While lead and pitch are two separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are three different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from one manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
Material of a screw shaft
A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than one made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each one will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between two and sixteen millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are two basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
Function of a screw shaft
When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.
editor by czh 2022-12-08